Kemper MaxiFil Clean Fibre Laser Extraction System
Mantech specifies Kemper MaxiFil Clean for Vector FL90 and FL130 installations — compact mobile fume extraction with ePTFE cartridge filtration and automatic filter cleaning, sized for enclosed mid-format Vector cutting cells.
Compact mobile extraction sized for Vector FL90 (1300×900mm) and FL130 (1300×1300mm) enclosed cells — integrating with your workshop layout, duty cycle and laser power during installation. Mantech engineers confirm extraction airflow and capture routing before commissioning.
Typical applications
Vector FL90 & FL130 cells
1300×900mm & 1300×1300mm platforms
1.5kW · 2kW · 3kW configurations
Mid-format workshop bays
Why workshop extraction matters
Mantech specifies Kemper MaxiFil Clean for Vector FL90 and FL130 installations — compact mobile fume extraction with ePTFE cartridge filtration and automatic filter cleaning, sized for enclosed mid-format Vector cutting cells.
Compact mobile extraction sized for Vector FL90 (1300×900mm) and FL130 (1300×1300mm) enclosed cells — integrating with your workshop layout, duty cycle and laser power during installation. Mantech engineers confirm extraction airflow and capture routing before commissioning.
Workshop risks without proper extraction include fine particulate exposure, laser fume at cutting source, dust on adjacent machinery, workshop air clarity in compact bays.
Key features
ePTFE cartridge filtration
ePTFE cartridge filtration for fine particulate capture
Automatic filter cleaning
Automatic filter cleaning for sustained workshop duty cycles
Compact mobile footprint
Compact mobile footprint — hood and ducting specified at installation
Workshop benefits
MaxiFil Clean supports effective dust capture at Vector FL90 and FL130 cutting cells — helping maintain cleaner air conditions within and around the enclosed platform during regular fabrication and training duty.
Matched to Vector FL90 & FL130
Sized for enclosed mid-format fibre laser cells — specified alongside your FL90 or FL130 power configuration, materials and duty cycle during Mantech installation.
Compact cell
Compact mobile cabinet suited to Vector FL90 and FL130 workshop bays — positioned alongside the enclosed platform without fixed plant-room extraction.
Sustained filter performance
Automatic filter cleaning for sustained workshop duty cycles
UK specification & install
Mantech engineers confirm extraction airflow, compressed air capacity and electrical supply before installation — matched to laser power, materials and workshop layout.
Mantech engineers confirm extraction airflow, materials, duty cycle and workshop layout before installation — matched to your Vector FL90 or FL130 laser power and production requirements.
Performance & installation
Mantech engineers confirm extraction airflow, materials, duty cycle and workshop layout before installation — matched to your Vector FL90 or FL130 laser power and production requirements.
Filtration media: ePTFE cartridge filtration
Capture efficiency: ePTFE membrane · >99.9% · dust class M
Filter cleaning: Automatic — sustained workshop duty cycles
Typical platforms: Vector FL90 · 1300×900mm · Vector FL130 · 1300×1300mm
Laser power range: 1.5kW · 2kW · 3kW fibre laser
Capture at install: Hood and ducting specified — not exhaust arm
Unit type: Compact mobile extraction cabinet
Capture interface: Hood and ducting specified at installation
Exhaust arm: Not included — routing matched to cell layout
Integration: Specified with Vector FL90 or FL130 during Mantech installation
Recommended for: Vector FL90 & FL130 enclosed fibre laser cutting
Compact cell alternative: Kemper FilterMaster XL for Vector FL60
Kemper extraction range
Kemper FilterMaster XL
Mobile extraction for Vector FL60 compact fibre lasers
Vector FL60 cells
Education & training workshops
Mobile workshop extraction
Kemper MaxiFil Clean
Mobile extraction for Vector FL90 & FL130 compact fibre lasers
Vector FL90 & FL130 enclosed cells
Compact cell
Mid-format workshop extraction
Kemper LaserFil Pro 3720
High-performance extraction for production fibre lasers
Vector FL250 & FL300 platforms
Continuous production environments
Higher dust volumes
Is the Kemper MaxiFil Clean suitable for Vector FL90 and FL130 fibre lasers?
Yes. For Vector FL90: Compact mobile fume extraction with ePTFE cartridge filtration and automatic filter cleaning — sized for enclosed mid-format fibre laser cells. For Vector FL130: Compact mobile fume extraction with ePTFE cartridge filtration and automatic filter cleaning — sized for the largest compact Vector enclosed cutting cell.
Is the MaxiFil Clean suitable for continuous production?
MaxiFil Clean is sized for Vector FL90 and FL130 workshop duty cycles with automatic filter cleaning for sustained operation. For heavier continuous production or higher dust volumes on production flatbed platforms, Kemper LaserFil Pro systems may be more appropriate.
Does the MaxiFil Clean include an extraction arm?
No. Hood and ducting are specified at installation for your Vector FL90 or FL130 cell layout — capture routing is matched to the enclosed fibre laser during commissioning. A flexible exhaust arm is not included as standard.
Can Mantech Machinery help confirm if this unit is suitable?
Yes. Mantech engineers confirm extraction airflow, compressed air capacity and electrical supply before installation — matched to laser power, materials and workshop layout.
Kemper MaxiFil Clean Fibre Laser Extraction System
Typical Fibre Laser Applications
Lower-power fibre laser cutters
Light to medium duty cutting operations
Single cutting stations
Workshops with limited available floor space
Designed for Fibre Laser Cutting Environments
Kemper MaxiFil Clean - Key Features
High-Efficiency Filtration
Light to Medium Duty Applications
Compact & Mobile Design
Automatic Filter Cleaning
Single Cutting Station Use
Workshop Environment & Practical Benefits
Specification & Application Guidance
Technical Specifications – Kemper MaxiFil Clean
Filtration & Performance
Airflow & Power
Physical & Installation Data
Where the MaxiFil Clean Fits in the Kemper Range
Kemper MaxiFil Clean
Kemper LaserFil Pro 3720
Kemper LaserFil Pro 3730
Kemper MaxiFil Clean – Frequently Asked Questions
Is the Kemper MaxiFil Clean suitable for fibre laser cutting?
Is the MaxiFil Clean suitable for continuous production?
Does the MaxiFil Clean include an extraction arm for fibre laser cutting?
Can Mantech Machinery help confirm if this unit is suitable?
Talk to Us About the Kemper MaxiFil Clean
Get a Kemper Extraction System Quote
The Kemper MaxiFil Clean is typically specified for the following fibre laser cutting scenarios:
Fibre laser cutting generates very fine metal particulates that require effective filtration. Compared to other cutting processes, fibre lasers produce a higher proportion of fine airborne dust, making suitable extraction particularly important in metal cutting environments.
The Kemper MaxiFil Clean is designed to support fibre laser cutting applications by supporting effective dust capture close to the cutting source, helping to maintain cleaner air conditions within the cutting area and surrounding workshop environment.
Cartridge filtration designed to capture fine metal dust generated by fibre laser cutting.
Suited to lower-power fibre lasers and light to medium duty cutting operations.
A space-efficient extraction unit ideal for workshops with limited floor space.
Integrated cleaning system helps maintain consistent extraction performance.
Designed for fibre laser cutting applications with moderate dust volumes at a single station.
For higher-power fibre lasers or heavier-duty continuous production, LaserFil Pro systems may be more suitable.
Effective extraction plays an important role in maintaining a cleaner workshop environment during fibre laser cutting. By reducing the circulation of fine metal dust, suitable extraction systems help support clearer air conditions within and around the cutting area.
In light to medium duty fibre laser cutting applications, the Kemper MaxiFil Clean provides a practical extraction solution that helps limit dust build-up on surrounding machinery and surfaces, supporting a cleaner and more manageable working environment.
The Kemper MaxiFil Clean is intended for fibre laser cutting applications where extraction demand is moderate. Correct specification depends on factors such as laser power, materials being cut, cutting hours, and the volume of dust generated.
The MaxiFil Clean is typically suitable for:
Lower-power fibre laser cutters
Light to medium duty cutting operations
Single cutting stations
Applications with moderate dust volumes
For higher-power fibre lasers, continuous production, or applications generating higher dust volumes, Kemper LaserFil Pro extraction systems may be more appropriate.
The following technical data is provided for reference. Suitability for fibre laser cutting applications depends on correct system specification.
Exhaust arms or duct connections are supplied depending on application and system configuration. Fibre laser cutting installations typically use fixed ducting rather than flexible extraction arms.
Positioning: Compact extraction for light to medium duty fibre laser cutting
Lower-power fibre laser cutters
Single cutting stations
Moderate dust volumes
Positioning: High-performance extraction for continuous fibre laser cutting
Medium-power fibre lasers
Continuous production environments
Positioning: Industrial extraction for high-power fibre laser cutting
High-power fibre lasers
Heavy-duty, multi-shift production
Demanding industrial environments
Yes. The Kemper MaxiFil Clean is suitable for fibre laser cutting applications where extraction demand is moderate and the system is correctly specified for the laser power, materials, and duty cycle.
The MaxiFil Clean is intended for light to medium duty fibre laser cutting. For heavier-duty continuous production or higher dust volumes, Kemper LaserFil Pro systems may be more appropriate.
Extraction configuration depends on the application. Fibre laser cutting installations typically use fixed duct connections rather than flexible extraction arms.
Yes. Mantech Machinery can advise on the suitability of the MaxiFil Clean based on your fibre laser cutter, materials being cut, and production requirements.
If you’re considering the Kemper MaxiFil Clean for a fibre laser cutting application, speak to Mantech Machinery for advice on correct specification and pricing.
Get a Quote for the MaxiFil Clean
