OUR NEW APPROACH TO LASER CUTTING MACHINES
Our new design model is far better than the conventional design. The Y bridge hangs from the X bridge. This implementation allows the laser head to be more dynamic with much higher acceleration. In this way we eliminated the requirement of double motors to drive the Y bridge. A big X axis motor is placed in the middle of Y bridge thus allowing X axis motion to be driven by a single servo motor.
ADVANTAGE OF SMALL PLACEMENT AREA
The new design has a considerable narrower width. The palette changer unit is placed near the machine and the laser unit is placed inside the machine, thus allowing the machine to ﬁt into a far smaller area in comparison to conventional machines.
SHORT INSTALLATION DURATION AND EASILY TRANSPORTABLE IN A SINGLE CONTAINER
Installation and implementation duration is fairly short since the electric board, laser unit, pneumatic board and all connections are implemented on the main unit. This new approach has considerably decreased the length of the machine and allows easy transportation of all machine parts including palette in a single rigid container
SERVICE AND MAINTENANCE ADVANTAGE
Wide doors on both sides of the machine allow easy access to all parts of the machine. Thus, service and maintenance work can be easily performed. Automatic oiling is performed in rack and linear rail system. The automatic oiling system eliminates the need for manual oiling procedure which was supposed to be performed by the operator.
HIGHER EFFICIENCY AND LOWER ENERGY CONSUMPTION
Thanks to the design, the X axis motion is performed with a single servo motor which reduces frictional losses and the mass of the Y axis is fairly reduced. The new machine is 35% more efﬁcient than its conventional counterparts.